Skip to main content

Udoo Neo Extended

4,695.00

Categories: , Brand: .

Product Description

UDOO NEO is an all-in-one open hardware low-cost computer equipped with a NXP™ i.MX 6SoloX applications processor for Android and Linux.

UDOO NEO embeds two cores on the same processor: a powerful 1GHz ARM® Cortex-A9, and an ARM Cortex-M4 I/O real-time co-processor that can run up to 200Mhz.
NXP® i.MX 6SoloX applications processor with an embedded ARM Cortex-A9 core and a Cortex-M4 Core
512MB (Basic) or 1GB (only Extended and Full)
Integrated 2d/3d graphics controller
Micro HDMI interface
LVDS interface + touch (I2C signals)
Analog camera connection supporting NTSC and PAL
8-bit parallel camera interface*
HDMI audio transmitter
S/PIDF & I2S*
1x USB 2.0 Type A ports
1x USB OTG (micro-AB connector)
Fast ethernet RJ45 – 10/100Mbps (only Basic and Full)
Wi-Fi 802.11 b/g/n,Direct Mode SmartConfig and Bluetooth 4.0 Low Energy (only Extended and Full)
3x UART ports*
2x CAN Bus interfaces*
8x PWM signals*
3x I2C interface*
1x SPI interface*
6x multiplexable signals*
5 V DC Micro USB
6-15 V DC Power Jack
RTC Battery Connector
Green Power Status LED
User Configurable LEDs (Red and Orange)
3-Axis Accelerometer (only Extended and Full)
3-Axis Magnetometer (only Extended and Full)
3-Axis Digital Gyroscope (only Extended and Full)
1x Sensor Snap-In I2C connector (only Extended and Full)
89mm x59mm (3.50? x 2.32?)
Arduino-Compatible through the standard Arduino Pins layout and compatible with Arduino shields.
32 extended GPIOs (A9 dedicated)
22 Arduino GPIOs (M4 dedicated)
6 available Pins
Android Lollipop & Linux UDOObuntu2 (14.04 LTS)

*Available on Pin Header

Reviews

There are no reviews yet.

Be the first to review “Udoo Neo Extended”