• USB Analysers
• USB Analysers

1480A USB 2.0 Protocol Analyzer

 The Model 1480A USB 2.0 Protocol Analyzer with OTG decoding is specifically designed for the road-warrior. It will easily slip into your coat pocket or laptop bag for those trips where bringing a large USB analyzer is not convenient. The physical format is very small, only slightly larger than a pen or a computer mouse. The enclosure is made out of very high-quality brushed aluminum.     Technical Specifications   ...

• Read more

• SPI
• CAN
• Protocol Analyser

Komodo Can Duo

The Komodo™ CAN Duo Interface is a powerful two-channel USB-to-CAN adapter and analyzer. The Komodo interface is an all-in-one tool capable of active CAN data transmission as well as non-intrusive CAN bus monitoring. The portable and durable Komodo interface easily integrates into end-user systems. It provides a flexible and scalable solution for a variety of applications including automotive, military, industrial, medical, and more. ...

• Read more

• USB Analysers
• USB Analyser

Beagle USB5000 Superspeed Protocol Analyser

The Beagle™ USB 5000 SuperSpeed Protocol Analyzer is the world's most affordable USB 3.0 bus monitor. Priced at $5,000, the Beagle USB 5000 analyzer provides real-time interactive capture and analysis of USB 3.0 and USB 2.0 (up to 5 Gbps). Free software and cross-platform support for Windows, Linux, and Mac OS X make the Beagle USB 5000 analyzer a user-friendly and versatile tool for any engineer working with USB 3.0 or 2.0. ...

• JTAG

XDS 560 V2 -JTAG Emulator

Call for Attractive Rental Schemes XDS560v2 is the TI XDS560v2 Reference Design Supports Texas Instruments Digital Signal Processors and Microcontrollers with JTAG interface: C64x+ C28xxx C5000 C6000 DaVinci ARM OMAP3 OMAP4 OMAPL13x Modular tail connector for alternate JTAG headers. Advanced emulation controller provides high performance. MIPI System Trace capability for advanced development. Programmable TCLK up to 64MHz. Ethernet communications to host PC. USB 2.0 communications to host PC. Supports +1.2V to +4.1V JTAG interfaces. User accessible RESET switch Power supplied by included +5V power supply. ...

• Read more

• JTAG
• JTAG

XDS 100 V2 -JTAG emulator

LOW COST JTAG EMULATOR   Supports Texas Instruments Processors and Microcontrollers with JTAG interface: ...

• Read more

• JTAG
• JTAG

XDS 510 Plus -JTAG emulator

This is the Value for Money JTAG emulator ...

• Read more

• JTAG
• Tools

SAM-ICE -JTAG emulator

SAM-ICE is a JTAG emulator designed for all Atmel AT91 ARM7/ARM9/Cortex-M3 cores. DLL files to support the SAM-ICE are available on the www.segger.com web site in the “Downloads”, then “J-Link ARM” sub-areas. ...

• Read more

• I2C

Level Shifter Board

The Level Shifter Board provides voltage level translation from 1.2V to 3.3V . Features Level shifting for I2C, SPI, and MDIO signals Supports voltage levels of 1.2V, 1.5V, 1.8V, 2.5V, 3.0V, and 3.3V Supply power to downstream devices I2C speeds of 800 kHz SPI and MDIO speeds of 20 MHz ...

• SPI

Beagle I2C/SPI Protocol Analyser

Beagle I2C/SPI Protocol Analyser The versatile Beagle™ I2C/SPI Protocol Analyzer is the ideal tool for the embedded engineer who is developing an I2C or SPI based product. The Beagle analyzer provides a high performance bus monitoring solution in a small, portable package. Perfect for engineers in the field and in the lab. ...

• Read more

• SPI

Cheetah SPI Host Adapter

Cheetah  SPI  host Adapter The Cheetah™ SPI Host Adapter is a high-speed SPI adapter that is capable of communicating over SPI at up to 40+ MHz. The Cheetah adapter is specifically designed to communicate with high-speed, SPI-based flash memory. It is an ideal tool to develop, debug, and program SPI-based systems ...

• Read more